In cutting tool technologies



In cutting tool technologies



In cutting tool technologies



In cutting tool technologies



In cutting tool technologies



In cutting tool technologies



In cutting tool technologies



In cutting tool technologies



In cutting tool technologies


6 Products found

See our range of Precision Cutting Tools and Machine Tool Accessories

The Brands You Trust

Our products are sourced from some of the finest cutting tool manufacturers around the world.  We are proud to be able to provide one of the most comprehensive range of tooling products available to the Precision Engineering Industry.   

More Brands


Providing full backup on all products with services including:

Latest Industry News

August 05, 2022 Poliprofile- R

The NEW broaching system POLIPROFILE-R by INTEGI minimizes broach load thanks to the pendular system. It is usable in all types of lathes or machining centers.

Poliprofile-R's has a number of benefits:

• High quality bearings to ensure a long tool life
• Dust – tight body to prevent chips from entering the bearing area
• Possibility to fit a frontal die-holder for external broaching
• Broach centering system for broaching up to 65 mm deep

For more information >

July 20, 2022 KYOCERA MEW Series

KYOCERA's new 'doubled sided insert' square shoulder milling cutter has set a new benchmark within the metal working industry. Suitable for 90° milling, MEW series come with a number of advanatages:

  • Economical 4-edge Insert
  • MEWH Helical End Mill Added
  • Improved Toolholder Durability and Insert Installation Accuracy
  • Excellent Surface Finish
  • Suitable for a wide range of Milling Applications

For more information >

July 05, 2022 KYOCERA CA3 Series Chipbreakers

The new KYOCERA CA3 series insert grades use an innovative technology to achieve both long tool life and stable machining.

Among KYOCERA CA3 series' many benefits are: 

  • Improved coating adhesion prevents chipping and provides stable machining
  • Micro TiCN Coating Provides Excellent Wear Resistance
  • Unique Insert Grades For Various Cast Iron Machining Applications (CA310/CA315/CA320)

Achieve quality results over a wide range of applications with these new CVD coated carbides for highly stable cast iron machining. 

For more information >

June 21, 2022 GERARDI Classic Line Angle Heads

Gerardi Classic Line 90 degreee Angle Heads are designed to be used on machining centres and can be automatically tranferred from the tool magazine to the machine spindle and back. Some of the main technical feautues of the Classic Line are:

  • Minimum thermal expansion and high corrosion resistant treated steel body
  • Main shaft is one solid piece with the drive input taper, case hardened and ground, to ensure maximum rigidity
  • Ground spiral bevel gears in the highest performance materials able to guaranteed less warming and noise and the highest Rpm
  • High speed until 10.000 rpm

For more information 

June 07, 2022 KYOCERA ZBMT Series

KYOCERA ZBMT- series profiling tools with 25 degree inserts provide high precision and stable machining in a wide range of applications, including copying, undercutting, tapering, V slotting, etc. Some of ZBMT-series features are: 

  • Improved dimensional accuracy with unique clamp structure
  • Firm insert clamping results in high precision and stable machining
  • Reduced chip control issues when machining at minute depths of cut

15° insert tip angle also available.

For more information > 

May 19, 2022 High Performance Milling MEV

MEV series from Kyocera are the new generation of high performance, economical, multi-functional milling cutters. Newly developed triangle inserts provide numerous solutions to machining challenges. The range includes End Mills, Face Mills,and Modular Heads. Among many benefits of MEV milling cutters are: 

  • High performance - low cutting forces and higher rigidity for excellent chatter resistance
  • Economical - longer insert and holder tool life
  • Multi-functional - can be used in shouldering, slotting, and ramping applications

For more information > 

April 26, 2022 Carmex Slim MT

A new product line of indexable Mill-Thread inserts and tool holders including multiple straight flutes for machining long threads from small to large diameters. Among many unique features of CARMEX Slim MT series are:

  • Advanced carbide and coating combination for extended tool life and improved productivity.
  • Most inserts are double sided.
  • Nickel coated holders for high wear resistance.
  • Unique clamping mechanism.
  • Large variety of holders & inserts in accordance to international standards.

For more information > 

April 20, 2022 R.STOCK Universal Tap Range

High performance tap range by R.STOCK made to achieve outstanding results in almost all material applications. These high quality thread taps will impress with their innovative cutting edge geometry and wear-resistant coatings! They are suitable for amost all material applications and provide

  • Absolutye accuracy
  • Gentle machining
  • No cutting errors
  • Optimal chip evacuation
  • No pre-expanding
  • No pitch distorsion 
  • High cutting parameters
  • Long tool life

For more information > 

March 30, 2022 KYOCERA Magic Drill DRA

Magic Drill DRA persents 5 advantages to efficiently solve common drilling difficulties:

  • Low cutting force design improves hole accuracy: special chisel edge with S-curve reduces thrust force and controls vibration.
  • Optimal web thickness limits 1 deflection: improved hole accuracy by controlling drill deflection with a 20% thicker web.
  • Fine chip breaking even in deep hole drilling applications: optimized chip thinning for stable chip evacuation; support groove with wider flute (5D, 8D) enables smooth chip evacuation.
  • Easy insert replacement: replace insert without removing screw.
  • Long tool life and stable machining of various workpieces: MEGACOAT NANO grade PR1535 is used to machine various materials from steel to stainless steel, with the combination of a tough substrate and a special nano layer coating.

For more information >

March 29, 2022 AX High-Performance Milling Cutters

Discover high performance Aluminum roughing and finishing tools that have undergone continuous development by FRAISA during the past years. Thanks to the innovative supporting chamfer technology the AX-FPS has set new standard in provididing maximum performance and low power consumption! These cutters are equipped with a speciallly ground roughing profile and an internal cooling channel. Ideal prerequisites for optimum chip removal. Some of the many benefits of AX series are:

  • Perfect coordination of the tools and machine environment (for cutting depths of up to 5.2xd)
  • Maximum productivity
  • Safety 

For more information >

February 09, 2022 DIXI Drilling Thread Whirler

DIXI Drilling Thread Whirlers are designed to comibine three operations in 1 tool. If classical method required 3 tools for chamfering, drilling and threading, the new method combines all three in one. Dixi Drilling Thread Whirlers ensure:

  • Improved cycle time
  • Positive impact on productivity and improved manufacturing terms
  • Tooling cost reduction and simplified stock management

For more information >

January 20, 2022 Quaker Houghton Coolants

Introducing Quaker Houghton Coolants, optimized for use with Cast Iron, Compacted Graphitic Iron, Stainless & Carbon Steel, Aluminium alloys, Superalloys made of Titanium, Nickel and Copper-alloys, Carbides, Glass and Composite materials.

Critical in metalworking processes, these coolants reduce friction between the workpiece and the machine tool. Houghton Coolants are formulated to solve today’s major metalworking challenges. They offer the following benefits:

  • Increased tool life
  • Improved surface finish
  • Enhanced fluid life
  • Optimized cycle life
  • Improved environmental impact from low consumption, foam and soap reduction, elimination of harmful chemicals, and more.

For more information >

December 10, 2021 COOLVAC Drum Vacuum System

Introducing COOLVAC - a fast and efficient drum vacuum system for removing coolants, oils, sludge, swarf, and other industrial waste. Robust and durable, COOLVAC is resistant to most volatile, non-flammable liquids.

COOLVAC adapts to standard 205L (44 Gallon) drums with a high suction rate at 45L/PMIN at 100PSI.

COOLVAC Drum Vacuums:

  • Efficiently drain coolant tanks even with chips & swarf.
  • Operate quietly and safely.
  • Have automatic safety shutoff valve to prevent overflows.

For more information >

November 18, 2021 Dixi Slitting Saws

DIXI’s slitting saws are designed to give excellent performances in all material groups, including: lead and high alloyed steels, stainless steel, cast iron and alloyed cast iron, super alloys, titan alloys, cooper alloys, aluminium, and gold.

Some of the key features of DIXI Slitting Saws are:

  • They are designed for many types of applications in terms of depth, width and shape
  • They guarantee better tool life than other milling solutions
  • Providing excellent surface quality
  • Reducing material waste
  • Reducing chip and burr problems
  • Meeting complex and precise manufacturing requirements

For more information >

October 12, 2021 H-Carb High Efficiency Endmills

Introducing the H-CARB Seven Flute high efficiency endmill from Kyocera, Solid Carbide Tools!

H-Carb Seven Flute Efficiency Endmill specialises in:

  • High-speed machining and deep axial trochoidal applications, with the ability for various lengths of cut.
  • Improved rigidity and chip flow while reducing deflection due to the specialised and improved core and flute design.
  • The seven-flute design gives a superior finish at high rates over 5 and 6 flute tools.
  • A variety of cut lengths and end configurations offered in the series with two cutting edge styles.
  • Available in either Ti-NAMITE®-M or Ti-NAMITE®-A coatings for a premium tool life and high performance in a variety of ferrous materials and high temp alloys.

For more information>

September 02, 2021 EZ Bar Series

KYOCERA has a wide range of machining applications with high precision and unique easy adjustment.  A wide application range as a result of the large tooling line-up!

The EZ Bar has many features:

  • Versatility in use for back boring, internal profiling, internal grooving, face grooving and threading and a large range of sleeves for various tooling applications.
  • Unique design that provides a smooth supply of coolant.
  • Prevents deviation with high-rigidity clamping.
  • Newly developed PVD coating PR1725 added to EZB boring bar.
  • EZ Bar PLUS is available, an indexable Boring Bar, which is a high precision solid bar with the advantage of indexable inserts reducing machining costs.

For more information>

August 16, 2021 SX High-performance Milling Cutter

The new SX high-performance milling cutter from FRAISA designed specifically for machining acid-resistant and stainless steels.  A high degree of quality for all situations, excellent cutting performance and long tool life are its advantages.

  • Maximum stability and very low-friction chip discharge.
  • Extremely smooth running of the cutter with low cutting forces.
  • Ultrafine-grain carbides have a high hardness and considerable edge strength.
  • Ultrafine-grain carbides form the basis of SX high-performance milling cutters. An extremely smooth DURO-Si hard coating protects the carbide from high temperatures and abrasive wear.
  • Integration of knowledge allows for simple, reliable, and fast implementation in production and enables milling difficult stainless and heat-resistant steels easy.

For more information>

August 05, 2021 EVOCUT-Line

The EVOCUT-LINE series offers a wide range of high-performance parting off tools.

The cutting geometries of the inserts are designed to achieve highest requirements and efficient machining of the most difficult materials. 


  • Four different insert sizes (1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm) in order to save workpiece material by fitting perfectly to any parting off operation. 
  • Four cutting geometries and six high performance grades, for outstanding performance in any situation. 
  • Several coatings available for tool life improvement in all kinds of materials. 
  • A wide range of tool holders with square shank starting 10×12 up to 20×20 mm, also available with integrated coolant supply. 
  • Parting off up to Ø 44 mm.

For more information>

March 03, 2021 PCD Combination Tool

Cost savings through the use of a JBO - PCD Combination tool. 

The internal thread for an oil filter connection is usually designed as a saw thread. This tool can help lower cost and time with a combination tool consisting of a thread milling cutter and a form milling cutter. The thread and then the seat for the O-rings can be produced by using only one tool.


  • the large pitch for quick screwing in
  • a self-locking mechanism to prevent unintentional unscrewing
  • certain insensitivity to dirt compared to other threads

For more information>

February 16, 2021 DHF New UEF-LEF Endmill Series

Unequeal spacing with five flute endmill

  • Improving vibration resistance
  • Unique ‘chipbreaker design’ to help avoid long strip chips accumulation
  • Available in 3D, 4D and 5D flute lengths
  • New G11 coating, significantly extending tool life
  • Suitable for Stainless steel and titanium alloy

For more information>

February 05, 2021 DIXI 7442/7443 COOL+ Series

This series offers and oriented lubrication ring bringing the lubricant nearest to the cutting zone and to accelerate its speed.

Available with two or three flutes for Ø0.30 – Ø5.00mm diameters.

January 14, 2021 Kyocera New Chamfering attachment for the DRV drill

Double inserts provide high efficiency machining, allowing for increased feed rates.

Excellent chip evacuation, with the grooves designed to follow the flutes of the drill body

High chattering resistance, molded chipbreaker on chamfering insert reduces cutting force, and special insert design prevents fracturing on the edge.

The DRV holder range has now also expanded to include 40-60mm diameters. 

January 01, 2021 Gerardi Driven Tools

Driven Tools for CNC turning centres allows milling, drilling and tapping operations on the lathes without additional parts handing. Supporting many CNC lathes including DMG Mori, Haas, Mazak, Okuma and BMT.

Technical Features:

  • Specially treated corrosion resistant steel body
  • Angular contact bearings and taper roller bearings on output spindle for better rigidity and longer life
  • Rated to 6000 Rpm
  • Internal coolant option- up to 100bar
  • Designed, manufactured and assembled in Italy

For more information>

December 25, 2020 DIXI small-size precision vice

This mini vice is designed with anodised aluminium with stainless steel support, includes a set of 2 clip-on jaws in stainless steel or Delrin with an adjustable clip on support base.

  • Compact
  • Easy to use
  • Can be used on all  measuring instruments
  • Can be rotated 360°

    For more information>

November 09, 2020 Kyocera’ MFF - Providing excellent finishing solutions

Kyocera has released their new MFF high precision cutter for finishing applications. With and enhanced cutter body design for a better finishing solution, and Molded wiper inserts increasing machining efficiency. Designed with a unique insert combination of semi-finishing and finishing, the MFF radically improves productivity by reducing quality issues. Inserts available in PV60M and PR1525 grades.

  • Adjustable cutting edge height for improved usability
  • High feed rates and high quality surface finish
  • Improved flatness and machining efficiency

For more information>

November 04, 2020 Fraisa’s Multicut XF

The new Multicut XF achieves levels of performance that can not be reached with conventional finishing cutter tools in regards to shape and positional tolerances, surface qualities or machining productivity. The advantages are reflected in productivity, price-performance ratio as well as the improved surface quality. An outstanding feature with the Mutlicut XF is the vibration-free machining process in conjunction with the recommended application data.

Other features of this Extreme Finishing Multi XF tool are:

  • Extreme dimensional and positional accuracy
  • Extreme surface quality on the component
  • Extreme process security
  • No vibrations
  • Shorter machining times
  • Lower production costs

For more information>

October 06, 2020 Kyocera’s new KPK Part-off Solution

Introducing Kyocera’s newly released High Performance Part-Off Solutions with the KPK Series. A unique design for superior performance including a new insert, blade and tool block designs for rigid, safe and secure part off operations.

  • Featuring an easy insert replacement reducing down time, with no hammer or screw required.
  • A strong clamping mechanism for increased insert stability and safety using three contact surfaces helping to eliminate sliding or chattering.
  • Unique chipbreaker designs for long tool life, using the advanced chipbreaker technology inherited from the KGD product.
  • Nickel Coated Blades

For more information>

July 06, 2020 COOLMXR Coolant Mixer Tap

The new COOLMXR coolant mixer tap range has just hit our shelves, which provides complete control of coolant concentration and dosage mixtures. All Australian made and owned and is designed to work within industrial environments with most cutting oil types (soluble and semi-synthetic).

COOLMXR Features:

  • Manufactured from billet 6061 Aluminium
  • Chemical resistant surface treatment
  • Drum and pail mount options
  • Water powered; Non-electric
  • Ideal for all purpose oils ( Soluble and Semi-synthetic)
  • Reduced downtime
  • Accurate and consistent concentration mixtures
  • Double-lock dial system

The COOLMXR uses smart mixing technology, with a specially tuned spout extension providing the perfect mixing environment for coolant output.

Simple connectivity using the COOLMXR suitable for both 205L barrels and 20L pails with secure interchangeable polypropylene risers.

For more information>

April 08, 2020 Kyocera’s Helical Endmill for Titanium Alloy Machining

Developed to help reduce chattering and chip recutting issues. The uniquely designed Insert combination has larger bottom inserts and positioned to manage large cutting forces. These bottom inserts are held in by double- faced contracts. This assists with stable machining and improved fracture resistance.

With longer tool life and low resistance JS chipbreakers along with tough PVD Coating these inserts suppress the heat at the cutting edge and provide sharp cutting performance.

The PR1535 have greater toughness, are fracture resistance and include a tough substrate and high heat resistance MEGACOAT NANO coating technology.

For more information >

April 08, 2020 Fraisa’s HX-RNVS and XSpeed-H range

Adding to the HX family, these have been specifically designed for high-performance milling of high-hard steels.

The HX-RNVS is made with a highly precise corner radius, which makes it very strong and precise, ideal for finishing operations with narrow tolerance bands and premium surfaces. These tools are very robust and enhanced for high cutting rates. The four fluted tool is suitable for materials with a hardness of more than 50 HRC and shows its maximum performance in 2.5D  & 3D machining.

The XSpeed-H has been developed especially for HDC and HSC milling. With the high number of cutting edges (up to eight teeth) this tool guarantees silky smooth movement of the miling tool, and gives the tool a long service life. XSpeed-H milling tools enable feed rates to be doubled for both HSC and HDC milling. This is a product feature that plays to the capabilities of today’s highly dynamic milling machines and reduces production costs long-term.

For more information >

February 10, 2020 STOCK’S Intelligent Tool Depot Systems

The Tool Stock Center TSC mini, TSC midi and TSC maxi optimise your tool management and storage. Gain increased security of your tool stock and transparency in your tool management!

The three tool dispensing systems TSC mini, TSC midi and TSC maxi offer flexible possibilities for made-to-measure tool storage. Individual dispensing possibilities such as drawers or spiral 
systems are available options.

For more information > 

February 10, 2020 JBO Precision Thread Gauges

Toolprocure have just secured a solid relationship with JBO ( Johs-Boss) for all thread gauges and measuring tools.

JBO, are the market leaders with exceptional stock holding and variety of thread sizes ranging from 0.5 - 300 mm diameter. Optimum surface finish on thread flanks and high hardness of thread flanks result in outstanding resistance to wear and long gauge life. Repeated tempering after the annealing process guarantees high form stability and dimensional stability. 

Gauges are produced to the reduced tolerance wherever permitted by the overall gauge tolerance.

For more information >

February 10, 2020 Eroglu Shrink Fit Range

Eroglu Shrink Fit Chucks are produced according to DIN 69882-8; 2002-11. When they are correctly utilised you will achieve the optimal precison of cyclic running and repetition, highest transferable torques, long operating life and the chucks are easy to use and maintenance free. 

  • range of 3 mm - 32mm     
  • tensile strength of material 1600 -1800 N/mm2
  • hardness 52+2 HRc                                    
  • maximum revolution 50,000 rpm (observe the rpm limits of the interface, fine balancing recommended)                   
  • usable shafts: cylindrical shafts - tolerance h6
  • maximum shrinking temperature 500ºC
  • maximum coolant pressure 80 bar 

For more information > 

February 10, 2020 Gerardi Double Zero Point

The Zero Point evolving goes on... Double Zero Point has been developed by the need to clamp workpieces and fixtures of all kind of shapes and  sizes. Thanks to a grid system you can get an immediate reconfiguration  always granting the highest precision and allowing max. accessibility and  machining on 5 sides. Zero Point allows you to set up jobs in a few seconds on the machine, saving around 95% set up time, increasing production and reducing scraps.

For more information > 

February 10, 2020 Kyocera’s NEW ALUMINIUM CHIPBREAKER

The newly designed AP chipbreaker targets efficient Aluminium alloy turning, and offers a high quality finishing process. 

Well-designed chip breaker is able to create stable chip curls while preventing built up edges, which is a cause to scratch finished surface, on the rake face. The chip breaking function is not so aggressive, but enough to control chips without trouble even in low D.O.C. process for sticky Aluminium alloy.Available in uncoated and DLC coated inserts.

For more information >



Thank you for signing up to our newsletter!

“…Their products are the highest standard in the industry, I highly recommend Toolprocure…”


“We did purchase a Gerardi Driven tool from Toolprocure a few months back that we were very happy with.”


“Just got around to trying out your cutter this week, the DHF UBT0302, and was pretty impressed. It has outlasted all our other brand cutters by far. To be honest I wasn't expecting much from this cutter as I'd never heard of DHF before, but the results can”


“I look forward to more dealings with Toolprocure, so far I have had a very good experience that I am sure will continue.”


“Those special tappered endmills are working great! I should have got it done a long time ago!”


“Coolant mixer works great mate, so much easier to fill the machine. ”


“Got broach today mate so Thankyou for fantastic service.”


“Got the job done, the tool worked very well. Thanks again”


“I did the maths and using solid carbide endmills to rough out my parts cost about $6.50 per part. I have now changed to using the Kyocera Hi Feed and costs about $1.50 per part. Getting very consistent tool life and is a little quicker. I am very happy ”


“We are very please with the performance of the M16 A-taps. They have exceeded my expectation in both swarf control and wear resistance.”


“The Thread Mill worked really well in the end. Thanks for your help with the feeds and speeds, the first one broke because I was running it way to fast.”


“Love the insert mate 😊 good chipping at all depths of cut, good for tapers”


“Thanks again for your great work this year. I’m actually going to pass your details onto a friend of mine at a local Sydney company, I hope that he uses your service!”


“... Congrats, Applitec inserts are great on all steel. I've used on CS1020, 4140, S1214 and many grades of stainless including 316.”


“We have been using the Gerardi 5 Axis Vice and we are very happy with how it works and the quality!”


“Thank you for the quick delivery of our order.”


“I am very happy with the Chandox chuck we purchased from you a few weeks ago.”